Touch-N-Go Color Changing Portable LED Lamp
Change colors with the touch of a finger! This LED lamp with a soft warm glow makes it the right light for any table, nightstand or deck that's in need of selectable soft lighting. And at just over 6" tall, it's the perfect travel size. On a full 4-hour charge via the included USB cable, the lamp will produce 3 hours of bright light, 6-7 hours of moderate light, and about 11 hours of low-light, making it a wonderful overnight nightlight.
- Dimensions: About 6.25" tall and 4" in diameter
- Body material: Aluminum+ABS
- Operational time: 3-11 hours working time (for low light, about 11 hours; moderate light, 6~7 hours; bright light, 2~3 hours)
- Charging time: 4 hours
- White Light: 3W
- RGB Light: 3W
- Lifetime: 20,000 Hours
Powering on the Lamp
- Press and hold the POWER ON/OFF BUTTON on the bottom of the lamp until the front LED indicator lights up blue. This indicates the lamp is in standby mode.
Turning on White Light Mode
- Once the lamp is in standby mode, tap the TOUCH PAD on top to turn on the white.
- The white light has 3 brightness levels, Cycle through these brightness levels as well as standby mode by tapping the TOUCH PAD.
Color Light Mode
- Long touch the TOUCH PAD (approximately 2 seconds) to switch back and forth between white light mode and color light mode. Once enabled, the color light mode will automatically cycle through 256 colors.Tap the TOUCH PAD to pause the cycle on a specific color and tap again to continue the cycle.
Powering off the Lamp
- If you don't use the lamp for an extended time period and wish to conserve power, turn off the lamp completely by holding down the POWER ON/OFF button on the bottom of the lamp until the blue LED indicator switches off.
1 x Table Lamp
1 x USB Cable
1 x User Manual